| Admin Password: |
(purposely not displayed for security protection) |
| Silence Suppression: |
No
Yes
|
| Voice Frames per TX: |
(up to
10/20/32/64 for G711/G726/G723/other codecs respectively)
|
| Layer 3 QoS: |
(Diff-Serv or Precedence value) |
| Layer 2 QoS: |
802.1Q/VLAN Tag 802.1p priority value (0-7) |
| No Key Entry Timeout: |
(in
seconds, default is 4 seconds) |
| Use # as Dial Key: |
No
Yes
(if set to Yes, "#" will function as the "(Re-)Dial" key)
|
| local RTP port: |
(1024-65535, default 5004) |
| Use random port: |
No
Yes
|
| keep-alive interval: |
(in
seconds, default 20 seconds) |
| Use NAT IP |
(if
specified, this will be used in SIP/SDP message) |
| STUN server: |
(URI or IP:port) |
| Firmware Upgrade: |
Via TFTP
Server
.
.
.
Via
HTTP Server
Automatic HTTP Upgrade:
No Yes, check for upgrade every
days (default 7
days) |
| DTMF Payload Type: |
|
| Syslog Server: |
|
| Syslog Level: |
|
| NTP Server: |
(URI or IP address) |
| Distinctive Ring Tone: |
Custom ring tone 1, used if incoming caller ID is
Custom ring
tone 2, used if incoming caller ID is
Custom ring tone 3, used if
incoming caller ID is
|
| Disable Call-Waiting: |
No
Yes
|
| Lock keypad update: |
No
Yes
(configuration update via keypad is disabled if set to
Yes) |
|
|